2003 Honda Accord Air Intake Kit Parts

Choose your Submodel for your 2003 Honda Accord

DX EX LX

Showing 1 - 3 of 3 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2003 Honda Accord Air Intake Kit 6 Cyl 3.0L K&N

Performance Air Intake System
Includes Red Air Filter/Water Repellent DryCharger Filter Wrap/Polished Tubing; Estimated Horsepower Gain 10.35 HP At 5522 RPM;CARB E.O. D-269-37
K/N s easy to install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in an attractive chrome-like finish.
Typhoon Complete Cold Air Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.500 In. (140mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 10.35 Hp @ 5522 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-4960
- Item Weight: 6.200 Lbs. (2.8 Kg)
- RPM: 5522
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 2.750 In. (70mm)
- System Type: Complete Cold Air
- Clamp Quantity: 5
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.750 In. (70mm)
- Horse Power Increase: 10 Hp
- Intake Pipe Inlet Length: 12.000 In. (305mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 24.000 In. (610mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 2.750 In. (70mm)
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
The K&N 69-1207TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord 3.0L V6 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1207TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Honda Accord	V	2997	6 Cyl 3.0L	EX	-

Brand	K&N
Part #	69-1207TP
Condition	New
Warehouse	C

2003 Honda Accord Air Intake Kit 6 Cyl 3.0L K&N

Performance Air Intake System
Includes Red Air Filter/Water Repellent DryCharger Filter Wrap/Red Tubing; Estimated Horsepower Gain 10.35 HP At 5522 RPM;CARB E.O. D-269-37
K/N s easy-to-install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a red powder coat finish.
Typhoon Complete Cold Air Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.500 In. (140mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 10.35 Hp @ 5522 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-4960
- Item Weight: 6.800 Lbs. (3.1 Kg)
- RPM: 5522
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 2.750 In. (70mm)
- System Type: Complete Cold Air
- Clamp Quantity: 5
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Red
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.750 In. (70mm)
- Horse Power Increase: 10 Hp
- Intake Pipe Inlet Length: 12.000 In. (305mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 24.000 In. (610mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 2.750 In. (70mm)
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
The K&N 69-1207TR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1207TR cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California or other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Honda Accord	V	2997	6 Cyl 3.0L	EX	-

Brand	K&N
Part #	69-1207TR
Condition	New
Warehouse	C

2003 Honda Accord Air Intake Kit 4 Cyl 2.4L K&N

Performance Air Intake System
Includes Red Air Filter/Water Repellent DryCharger Filter Wrap/Polished Tubing; Estimated Horsepower Gain 3.85 HP At 5097 RPM;CARB E.O. D-269-37 w/o Mass Air Sensor~69 Series - Metal Intake Kit For Sport Compact & Sports Car; Polished [CA]~Not CARB exempt for LEV2 SULEV Engines
K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a chrome-like finish.
Typhoon Complete Cold Air Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 3.85 Hp @ 5097 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-4870
- Item Weight: 6.400 Lbs. (2.9 Kg)
- RPM: 5097
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 2.750 In. (70mm)
- System Type: Complete Cold Air
- Clamp Quantity: 7
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.750 In. (70mm)
- Horse Power Increase: 4 Hp
- Intake Pipe Inlet Length: 15.000 In. (381mm)
- Air Filter Element Washable: Yes
- Couplers Included: 3
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 20.500 In. (521mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 2.750 In. (70mm)
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
The K&N 69-1206TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord and VIII models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1206TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.